Repair And Restoration
TO ADD FORUM POST USE THE DISCUSSIONS TAB OR ADD NEW TOPIC IN THE SIDE BAR
Organizer:
- Organized by
-
-
Taylor crack repair – Finish touch up guidance please!
-
Taylor crack repair – Finish touch up guidance please!
Hi there looths,
Hoping you guys can help me identify what uv resin or other compatible finish can be used to finish this crack? I’m comfortable true-ing up the material and gluing, however I’ve only really done nitro or polyurethane finish touch up.
Thanks,
Aleks
-
2 Replies
-
On the recommendation of Dave Staudte I use Mohawk M102-0720 (Matte 19-23 Sheen). It works really well for blending into the orignal finish.
-
Yeah, I’d get that end pin out of the way, repair as you normally would. It looks like, the tail block is loose. Get it all level. I would use some light coats of Poly as a base coat, light scuff, then use the Mohawk, it doesn’t build like you would think and takes several coats. You can blend the edges of the Mohawk with a felt block to get the crustiness off I would spray the whole area from top to back, like a 6″- 8″ stripe. Then you only have 2 edges to blend.
Log in to reply.