Repair And Restoration
TO ADD FORUM POST USE THE DISCUSSIONS TAB OR ADD NEW TOPIC IN THE SIDE BAR
Organizer:
- Organized by
-
-
Celluloid Rot
-
Celluloid Rot
Someone came to me with an old Gretsch afflicted with binding rot. The cream binding was mostly intact, with some pitting and discoloration in various spots, and only a couple of pieces loose. The owner was aware that the only sure cure was the removal of the old binding, and then rebinding the guitar. They didn’t want to invest that much money into a repair.
I rediscovered a StewMac video from 2017 called “Guitar repair using kitchen chemicals”. In this video, Steve Uhrik (owner of RetroFret Vintage guitars in Brooklyn, NY) shares some tips he says he got from Joe Pecnik, who worked at the Metropolitan Museum of Art in the Department of Musical Instruments.
One tip shared was adding some sodium bisulfite (an antioxidant that can be used in food) to 2 part epoxy to patch rotted celluloid pickguards, and that this can help stop the deterioration from spreading.
I re-glued any loose binding, filled any deep pits with epoxy paste, and then very lightly painted the binding with the epoxy/sodium bisulfite using tiny micro brush applicators. I think it worked out very well, as all the hairline cracks in the binding were reinforced, and the binding sealed. It should not impede binding removal in the future, as the coating is on the outside only.
I also got some “Zerust Plastabs” (which are used to stop rusting) and stuck a couple in the case. I don’t really know if this will have a beneficial effect on binding oxidation, but perhaps it will, and maybe it will keep the metal parts and frets from reacting.
-
6 Replies
-
Interesting video. I have no idea about the efficacy of the sodium bisulfite. It occurs to me, that if you aren’t going to ensconce the entire object in the stuff, the affliction will just appear elsewhere given enough time. Might be long enough though. Let me know how it goes.
https://youtu.be/wZz1OCBt-U4 -
Well, given enough time, we shall all be dust. I just hope the Gretsch doesn’t come back.
-
Upon further review, I’m suspicious of the efficacy of the bisulfite method. I think if I was trying to preserve the pickguard shown in the video, I would cut out the rot like cutting out a tumor. Like remove way past what is apparent to be sure the bad chemistry is gone. Then I would fill the defect and then either keep the guitar out of case for storage in perpetuity, or look into how those fancy pen people store their pens to soak up the fumes.
-
Fancy pen people Know-how
Log in to reply.