[Buddy Cazee Mulberry Street Guitars / Cazee Pickups]

Thanks for the reply. I think we are going to go with a 3 knob set up ala Brent Mason wiring where he can blend the middle position between the 2. Possibly add a push pull on the tone for either series /parallel or split coil from it. I had the same reservations, but was curious how the 3 coil set up would sound. I was hoping someone had tried it before and had some feedback. Guess not.

[Buddy Cazee Mulberry Street Guitars / Cazee Pickups]

Thanks for the tip. Really have to be careful with acetone. Does the acetone work down into the joint pretty well? The saddle is a long through saddle, so I would have to figure out how to get it under the rounded edges. I was concerned about the possibility of the bridge being dyed as some manufacturers have started doing this. Thanks for your suggestion.

[Buddy Cazee Mulberry Street Guitars / Cazee Pickups]

Thanks Ian. When you heat it, do you do it in short bursts taking heat on and off of it, or do you keep it on for the whole time? When I remove hide glue, I typically do (2) 3 minute soaks and it releases. Any idea how long it should take? Just don’t want to break down the glue under the bridge. Thanks again for your reply.

[Buddy Cazee Mulberry Street Guitars / Cazee Pickups]

Ian – Thanks for the offer of help. I got it out and got it fixed. It was some type of nylon plastic by the consistency. Thanks again.

Buddy