Ray Cutler
-
-
-
Is anyone out there using laminated linings? I’ve done them a couple times before, gluing the in place one at a time. I use 4 pieces/side, approx 1.7mm each. I like this better than 3 piece and I haven’t tried 2 piece yet. Do any of you glue them together as opposed to gluing them to the sides one length at a time? It seems that would be…
James Huntley and sean RT Gold City Guitar Repair -
I’m having trouble getting my mic to work with REW. I’m at the beginning of a new build and would like to measure the tonewood properties. I am trying to follow Giuliano’s instructions in his book. everything seems to be working but they don’t talk to each other. I think its a calibration or pc setting but I’m not very computer savvy and…
Mark, Danny West West Guitarworks and Doug Proper Guitar Specialist -
Can someone tell me if there are recordings of previous presentations, particularly the Total Vise discussion a couple weeks ago, and if so where they are available? thanks
-
Paul, no I haven’t. Everything seems to be on the money if I do my part and enter the correct info. Thanks
-
Michael, no I don’t. I’m using the CNC for Luthiers course on Robbie O’Briens site. Bob Mizek presented the course. There is a section on there about doing fretboards. It gives all the info I need I just need to follow instructions. Can you tell me what gadget you’re talking about? I would like to get to the point where I can actually…
-
I want to thank both of you for your help. A rookie mistake. I had set a previous cut of the fretboard outline to ‘outside’ and forgot that it carried over to the next toolpath. I redid it and set it to ‘on the line’ and its all good now. Thanks again
-
I’m fairly new to CNC and am attempting to set up for a fretboard carve. I’m using a one year old ShopBot Desktop Max. This is the first I’ve found a problem like this. I made some practice blanks and thought I had everything the way I wanted it until I measured me fret distances. Using calipers from the nut to the center for the first… Read more
