Alex Aguado Guitar Teckery
-
I’m putting together the parts for a partscaster and was hoping to buy a large volume knob for it. Looking for something like the one on the Earthquaker Acapulco pedal. I’ve looked on eBay but not quite sure what key words to use in the search, I’m getting back results with knurled telecaster knobs. Thanks.
Glenn Cummins G Cummins Guitars and David Ross David Ross Musical Instruments -
Strat pickgaurd 2 p90s, one volume and 3 way switch
Anyone know where to purchase something like this?
Also, I think the “maker” place in town has a 3d printer, has anyone had luck printing pickguards?
-
Size of grub screw on stewmac fret jaws
I bought a used stewmac Fret Jaws but the black part that holds the fret inserts is missing the screw. I think it should be an Allen head grub screw. Does anyone know the size of that screw so I can get a replacement? Thanks.
Thom Abell String Theory Guitar Repair -
Refretted my Yamaha Studio Lord 550 with jumbo frets. This is my second
fret job. First was on a bolt-on BC Rich neck. The Studio Lord (Les Paul copy) was my first set neck
project. It is pretty good. No fretting out. I set the action at
4.5/64 on bass and 3.5/64 on the high strings. Today I noticed that if I bend a high F to G (13th fret… -
Refretted my Yamaha Studio Lord 550 with jumbo frets. This is my second fret job. First was on a bolt on BC Rich neck. My first set neck project. It is pretty good. No fretting out. I set the action at 4.5/64 on bass and 3.5/64 on the high strings. Today i noticed that if i bend a high f to g (13th fret on first string) the note frets out…
-
Reply to Locating a wrap around bridge
Right. The BC Rich Bronze had a wrap around bridge with individual saddles for each string. The studs were tilting towards the nut so I pulled them and used a dowell to plug the holes. I’ve put together parts-casters before and all of them had pilot hole or were used bodies so placing the bridge was easy. This is the first time I have had…
Glenn Cummins G Cummins Guitars -
I have a BC Rich Mockingbird (Bronze) that I am practicing my tech skills on. I refretted it and that came out pretty good.
I pulled off the old rusty wrap around bridge and am replacing it with a Wilkinson preset. I’m in the process of trying to locate the studs/bushings and I thought I had a good idea on setting the scale length but then I…
