Ian Davlin The Looth Group
Forum Replies Created
-
Matthew Larrivee said he hipped them to it. He’s waiting for the go ahead from them to spill the beans.
-
I use the levoit based on the recommendation of @9706232586 .
-
Is this what your were trying to do ?
https://youtu.be/Hgr8Fc_rLXw -
Hey, you want to post the model you have so far? Looks like you can attach anything that is in a zip file.
-
This looks like a job for a Boolean cut. You know from doing that?
-
I would think those would be pretty easy to make look good. The figure is so busy, just about anything dark will blend right in.
-
I picked up this habit from my days at Breedlove
- The top of the bench is made with particle board capped with melamine
- 3/4” foam wrapped in flannel just barely big enough to hold a guitar, but too small to put parts or loose sandpaper on.
-
I think it’s a good idea to run down to Home Depot and grab some pine or poplar and give these procedures a test before cutting wood that hurts to replace.
-
This is one of the reasons I almost always make my own bridges. It’s just hard to do it any other way and have it line up. Also, I’m a firm believer in cutting that saddle slot after the bridge is on.
As for how it is now, very difficult to improve. A little shellac might help, but it’s probably best just to leave it, or go hard and make a new bridge etc.
-
Can you post a good well lit picture of the gap please.
-
Hi there. if you look at the Keenovo website they do blankets in all sizers voltages and wattage ratings to.
keenovo.store
Description: Wonderful silicone heater for your musical instruments side bending and/or wood working PVC bending jobs. Please choose the suitable version for your task. Blankets with Dial Thermostat are generally designed with medium heating performance. Versatile and may be used … Continue reading
-
Try now.
-
It may be tough to do, but if you could post a pic, it would really help This is a safe space for this kind of thing.
-
Post 3
A little more progress today.
The guitar rack is built. It’s real simple and thrown together. If I built guitars like this they wouldn’t last long lol.
Not a single piece of the construction timber was straight so it’s a little wonky but purposes full.
I’m thinking of eventual putting does on and running a humidifier and heater etc in there. Any experience doing this sort of thing would be handy.
I have also realised I have to many junker guitars I’m taking with me. Some of these will become a bonfire I thinks.
Next up the wall!!
-
Excellent racksmanship.
-
-
https://www.patreon.com/posts/ding-kings-sg-up-63416116
This is really pretty similar in concept.
-
One thing that is trick about this is that the color is probably a combination of red pore filler and red lacquer toner coat.
If I was going to A game this, I would definitely try to mix up some pore filler where it is missing.
I also second what @Brockwaystrings says about steaming out what can be steamed out. DO you know how to do that with a paper towel and a soldering pencil. ?
-
What is the clear material you used for a block ?
-
Looks really good !
-
maybe the ebony is dyed. I would try sealing with gluboost or epoxy first.
-
Recently I’ve had a few people call me for initial contact, I’m not sure how they got my number, but then I tell them to email me instead. If they cant do that, then it’s pretty much over.
There is nothing that is going to happen in a phone call that I am gong to remember at this point. I need the paper train of the email to keep track of anything. There is literally no point in telling me anything on the phone because I really don’t care anymore and I will just space out and say a bunch of random grunts until I can get off the phone.
-
I think so. I would probably use West with some of the 404 filler added so it doesn’t show through if there is an inspection light on the inside.
-
I’d say the neck needs to come back off. Sorry dude.
-
Is the fingerboard extension tight to the top ?
-
Can you hit me with a link ? Sounds cool.
-
I meant the clear tape looking stuff. Kinda looks like frisket
-
fantastic !
-
Toner coat is just a coat of lacquer that has color in it. Usually translucent and meant to make a subtle change.
-
Nice!
-
I’ll be around yo. Let me see what I can cook up.
