Total Vise Quick Dock Neck Rest
A couple of years ago, I came up with a neck rest for the Total Vise system- they worked great but were quite difficult to…
Loothprint Type: Tools
Router fence ruler attachment
This little attachment clips onto your ruler and indexes to a 1/4 router bit, to easily find the distance from the center of the bit to the fence.
…
3D Printed Cauls for TJ Thompson Cleats
Since switching to using TJ Thompson cleats, I’ve created several cauls for top and bottom cracks. The top crack cauls are for X braced guitars…
Headstock Jig
Broken headstock glue ups are tricky, especially if the headstock is completely broken off the neck. The headstock needs to be aligned to the neck…
Fractal Fret Press adapter for Gable Arbor Handle
This might be useful for you, but use at your own risk. Since the fractal press is not grooved, it could slip sideways off the fret and dent the fretb
FretSander
My favorite way to remove scratches after re-crowning frets is to use 400 and 600 grit sandpaper followed by quad 0 steel wool and Dremel…
Print-in-Place Bridge Pin Puller Pliers (“Yoinker” Style)
These bridge pin puller pliers are a compact, print-in-place tool modeled after Ian Davlin’s “Yoinkers.” They’re designed to grip and extract bridge pins cleanly, without…
Tang Catcher
This STL file is an attachment for the StewMac Deluxe Fret Tang Nipper. It’s designed to catch the clipped fret tangs during use, keeping your…
Quick-Grip Extension Feet
About a year ago I had the idea of making little extension feet for those little Irwin Mini Quick Grip Clamps – also widely known…